The LYCO® Anodeless Meter Riser provides a positive transition joint between polyethylene pipe and the gas-carrying steel pipe of the meter assembly set, and requires no cathodic protection below ground.

Select a product below to view or print
sizes and part numbers.
(requires Adobe Acrobat Reader)

• Pre-Bent Standard PE Pigtail
• Pre-Bent w/ Long PE Pigtail Runs
• Commercial / Industrial Sizes
• Flexible

Custom Options:

• Coastal Corrosion Packages
• Factory-Installed Shut-off Valves
• Factory-Installed Mechanical Couplings
• Wall Brackets and Riser Stakes
• LYCO By-Pass Check Valve
• Flanges for Commercial / Industrial Sizes
• Custom Dimensions
• Protector Sleeves
• UV Shields
• Tracer Clips and Wire
• Wire Retainer
• Choice of Medium or High Density PE
• Long PE Pipe Runs
• Service Line Kits

Performance:
Proven reliability with over 15 million LYCO® Meter Risers installed since 1973.

Cost Effective:
LYCO® Anodeless Meter Risers provide market leading savings with a high level of quality and volume production. The simple design concepts used in the gas-tight PE to Steel transition provides lower component costs with virtually no field repair or replacement time required by the field crews.

Safety and Dependability:
The design and production methods used in compressing the gas-tight transition fitting provides a PE to steel joint that is much stronger than the PE pipe itself. In addition, each LYCO® Meter Riser is 100% pressure tested prior to shipment.

Advanced Features:

• LYCO® Anodeless Meter Risers meet all DOT 192.281, 192.283, 192.375 and ASTM D-2513 CAT-1 specifications.
  
  
• R.W. Lyall & Company pioneered the industry’s first anodeless meter riser utilizing a ground level transition between the polyethylene pipe and steel pipe of the riser outlet, eliminating the need for cathodic protection for the gas-carrying steel pipe installed below ground.
  
  
• The LYCO® transition fitting provides a leak-proof seal between the smooth ID surface of the polyethylene pipe and the grooved steel spigot.
  
  
• An electrostatically applied epoxy coating on the riser casing provides long-term underground corrosion protection of the metal casing and a water tight, below ground seal prevents ground moisture from entering the riser.

Specifications...
IAPMO Certification

Top